Skip to Content
  1. All Products
  2. All Products
  3. Ritter R200EA 5' x 12' Face Frame Assembly Easel -  with 5 Clamps
Public Pricelist - Ritter Site
Ritter R200EA 5' x 12' Face Frame Assembly Easel -  with 5 Clamps

Ritter R200EA 5' x 12' Face Frame Assembly Easel -  with 5 Clamps

https://www.rittermachinery.com/web/image/product.template/19295/image_1920?unique=17abe0b

Description:

Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No glue required.

Standard Features:

  • 5'x12' Assembly Table
  • 45 Degree Vertical Easel
  • Hold Down Beam with (5) Adjustable Hold Down Cylinders
  • Squaring Bars on Left, Right and Bottom Sides
  • 1" Thick Laminated Surfaced Table
  • Heavy Duty Steel Frame
  • (1) Coilhose for Pneumatic Screw Gun
  • Screw Gun Not Included

Technical Data and Specifications:

  • Usable Table Area: 58.5" x 141"
  • Footprint: 165" L x 48" D
  • Electrical: N/A
  • Air: 100 PSI

Additional options:

  • R200A - Face Frame Assembly Clamp Arm

Shipping Weight: 1250 LBS
Shipping Dimensions: 68" X 169" X 30" H

$ 9,290.00 9290.0 USD $ 9,290.00

$ 9,290.00

Not Available For Sale Online

This combination does not exist.

Contact Us

 Terms and Conditions

Internal Reference: R200E/A

Designed for pocket joinery face frame construction. The R200EA provides the most efficient and economical method of frame joinery. Flush and tight joint construction is provided on all types of wood. The elimination of dowel boring, dowel and glue insertion, clamping time and joint misalignment provides up to 50% reduction in frame construction. The ability to disassemble a frame and reposition a joint without the loss of material adds to the systems productivity. The design of the pocket borer eliminates the need for glue to be applied to the joint.

For the assembly of wooden cabinet face frames. This heavy duty table insures a flat surface, with squaring corners, and a set of pneumatic clamps to secure the frame during assembly. Used in conjunction with a pocket hole cutter, such as the R200T, or the R220T, to create the screw pocket.

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

Joint Construction

Material thickness variations do not create misalignment at the face side. This is provided by clamping the material down with the R200A clamp beam. Tight joint construction is provided by the screws being used as the tightening force, not side clamping pressure. The screw angle is adjustable to allow for 5/8” or thicker material.

Pocket Hole Drills

Videos

Need More Information?

Give Ritter Machinery a call today or find your local Ritter Distributor here.

Contact us